Torchon bobbin lace patterns to make two bracelets. The pattern uses 12 pairs and Finca 30 or stranded embroidery thread, metallic thread and beads. The bracelets have beaded rose ground and spiders and come with instructions. Ideal for all levels of lacemakers and can be made to fit any wrist.

Elevate your lace-making with "A Lace Rosarium" pattern. Craft at least 7 unique versions using 3 rose ground stitches from one pricking. Plus, add a touch of elegance with a gimp thread outlining the exquisite rose ground detail. Complete with step-by-step instructions, this Torchon lace design offers endless creative possibilities for crafting stunning and intricate bookmarks. Your lace-making journey starts here!

Bobbin lace pattern to make a 2011 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern complete with instructions. The pattern takes up to 19 pairs and Finca 30 or stranded embroidery thread. The design has leaves and beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2012 Torchon Angel lace for Christmas. The pattern takes up to 18 pairs and Finca 30 or stranded embroidery thread. The design has beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2013 Torchon Angel lace for Christmas. The pattern takes up to 22 pairs and Finca 30 or stranded embroidery thread and metallic. The design has half stitch trails. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2014 Torchon Angel lace for Christmas. The pattern takes up to 24 pairs and Finca 30 or stranded embroidery thread. The design has rose ground and beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2015 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern to make the 2015 angel for Christmas. The pattern takes up to 26 pairs and Finca 30 or stranded embroidery thread. The design has half stitch trail, plaits and little beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2016 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern to make the 2016 angel for Christmas. The pattern takes up to 21 pairs and Finca 30 or stranded embroidery thread. The design has triangular ground and little beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm.

Bobbin lace pattern to make a 2017 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern to make the 2017 angel for Christmas. The pattern takes up to 30 pairs and Finca 30 or stranded embroidery thread. The design has spiders and little beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 20187 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern to make the 2018 angel for Christmas. The pattern takes up to 28 pairs and Finca 30 or equivalent. The design has spiders and rose ground with beads in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a 2019 Torchon Angel lace for Christmas. A Torchon bobbin lace pattern to make the 2019 angel for Christmas. The pattern takes up to 28 pairs and Finca 30 or equivalent. The design has Eight Thread Armore, a Binche technique. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

A Torchon bobbin lace pattern to make the 2020 angel for Christmas. This unique pattern includes the must-have accessory for this year, a face mask. The pattern takes up to 27 pairs and Finca 30 or equivalent. The design has beaded rose ground and half stitch hearts. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

A torchon bobbin lace Holly Angel for Christmas 2021. A Torchon bobbin lace pattern to make an angel for Christmas. The pattern uses up to 26 pairs and comes with a list of suitable threads. The design has half stitch haloed spiders, a cordonnet gimp and plaits in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Bobbin lace pattern to make a Torchon bobbin lace Angel for Christmas. A Torchon bobbin lace pattern to make an angel for Christmas. The pattern uses up to 24 pairs and Finca 30 or stranded embroidery thread. The design has spiders and rose ground in it. Some knowledge of torchon would be helpful. The angel stands approximately 7.5cm x 7.5cm. The pattern comes complete with instructions.

Torchon bobbin lace pattern for an Anniversary or Wedding picture frame surround. The pattern uses 20 pairs at most and uses beads in the design. Some knowledge of torchon would be helpful. The finished size is approximately 18.5cm x 14.5cm and uses Finca 30. The pattern comes complete with instructions plus straight and corner designs to make your own size.

Torchon bobbin lace pattern to make a double garter, border, or cake frill. The pattern uses up to 42 pairs and can be made in one of these threads: Finca 40, Madeira Tanne/Cotona 30, DMC Cordonnet 80, or Special Dentelles 80. The bottom garter design is 7cm wide, the top garter is 5.5cm wide. The design has spiders and comes with full instructions. Ideal for all levels of lacemakers and can be made in any size.

Torchon bobbin lace to make a bookmark with the April Diamond birthstone. The bookmark measure 16.5cm x 3.75cm without the tassels. The pattern requires 22 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and beads. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses rose ground spiders

Torchon bobbin lace to make a bookmark with the August Peridot birthstone. The bookmark measure 16.5cm x 4cm not including the tassel. The pattern requires 20 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and bead. The pattern comes with full instructions and is ideal for all levels of lace makers.

This is a pattern for an Autumn Coaster in Torchon bobbin lace. The pattern is to make a coaster with leaves and half stitch clover ground. Uses 22 pairs and the thread can be variegated 35wt or stranded embroidery thread. Valdina 30, Finca The pattern is suitable for lacemakers with a knowledge of leaves and plaits. The finished size is approximately 80mm square. The pattern comes complete with instructions.

A Torchon bobbin lace pattern to make a candle frill. The pattern uses 32 pairs in total, 26 pairs in the main colour and another 6 pairs in 2 metallic threads. The thread used is Finca 30 and Finca metallic. The design has beaded rose ground in it. Some knowledge of torchon would be helpful. The pattern comes complete with instructions. Any questions I'm just an email away.

Torchon bobbin lace to make a bookmark with a cross design. The bookmark measures approximately 15cm x 5cm not including the tassel. The pattern requires 24 pairs of bobbins, plus a gimp pair and can be made in either Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread.. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses spiders.

A pretty celtic knot love heart pattern in bobbin tape lace. The pattern includes 2 sizes, the small heart pricking measures approximately 7.5cm x 6.5cm and the large heart pricking measures approximately13.25cm x12.5cm. The pattern takes 10 pairs of bobbins, comes with full instructions and a list of suggested threads. The pattern is a tape lace and you can choose the stitches you wish to use in the trail.

Create a stunning Celtic Knot Star with this Torchon bobbin lace pattern, complete with instructions. The pattern uses 8 pairs including a gimp thread for the ring and 4 pairs plus a gimp thread for the star. The pattern is complete with suggestion for threads and instructions. The circle and star are also included as individual prickings, to make it easier for beginners. Ideal for all levels of lacemakers.

A Torchon bobbin lace pattern to make lace for Christmas decorations. The pattern uses 24 pairs and Finca 30 or stranded embroidery thread. The design has spiders and honeycomb in it. Some knowledge of torchon would be helpful. The pattern comes in two sizes. One will fit over a 22cm bauble and the other design can have a small bauble inside to make a bell. The pattern comes complete with instructions.

Torchon bobbin lace patterns to make Christmas borders. The pattern uses 10 pairs and some experience is required but the pattern does come with full instructions and diagrams. The border measures approximately 1.5cm wide. The pattern comes with 2 sized rectangles, a square and a corner to make your own size design. Rectangles measure approximately 12.25m x 9.75cm and 8cm x 6.25cm. The square measures 6cm sq.

Torchon bobbin lace patterns to make Christmas borders. The pattern uses 13 pairs and some experience is required but the pattern does come with full instructions and diagrams. The border measures approximately 2cm wide. The pattern comes with 2 sized rectangles, a square and a corner to make your own size design. Rectangles measure approximately 9.8m x 12cm and 7.75cm x 9.75cm. The square measures 7.75cm sq.

Bobbin lace pattern to make a Torchon lace cracker for Christmas. A Torchon bobbin lace pattern to make a Christmas cracker which can be used as a gift bag. The pattern uses up to 46 pairs and Finca 40 and metallic thread. The design has spiders and rose ground in it. Some knowledge of torchon would be helpful. The cracker measures approximately 21cm x 8.5cm round. The pattern comes complete with instructions.

A Torchon bobbin lace pattern to make a lace decoration for Christmas. The design has spiders and rose ground in it.metallic thread, Madeira Tanne/Cotona 30 or DMC Cordonnet 80 and Finca 40 The pattern uses 30 pairs. The pyramid tree stands approximately 7cm high. Some knowledge of torchon would be helpful. The pattern comes complete with instructions. Any questions I'm just an email away.

A Torchon bobbin lace pattern to make Christmas tree cake frill. The pattern uses 28 pairs and thread choices can be Madeira Tanne/Cotona 30, DMC Cordonnet Special 80 plus a metallic thread. Some knowledge of torchon is needed. The cake frill stands approximately 6.5cm (2.5 inches) and the pattern repeat is approximately 2.5cm (1 inch). The pattern comes complete with instructions.

Torchon bobbin lace pattern to make a Christmas tree decoration. The design makes a Christmas tree decoration. Thread used is Finca 30 and a thicker thread for the gimp. The design uses 48 pairs. The approximate finished size is 9.5cm x 9cm. This design uses beads and comes with instructions. Some knowledge of Torchon is necessary.

Torchon bobbin lace pattern to make a tea light holder with rose ground crosses. The holder measures approximately 6.25cm x 4cm when completed and the pattern comes with full instructions. This holder is ideal for lots of different occasions from Christmas, Easter, weddings and much more. All you have to do is change the colour of the thread and the colour of the gimp. Ideal for all levels of lacemakers.

Torchon bobbin lace to make a bookmark with the December birthstone. The bookmark measure 16.5cm x 4.25cm not including the tassel. The pattern requires 22 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and a bead. The pattern comes with full instructions and is ideal for all levels of lacemakers. The bookmark uses spiders.

Elizabeth, Angel 2022 is this year's Angel pattern to commemorate the Queen's life. Taking inspiration from the Coronation dress, the pattern includes cordonnets and beaded rose ground. A list of materials is included with the pattern. There are no instructions with this pattern, an online course has been created to instruct you through every stage of the pattern. A knowledge of bobbin lacemaking is recommended.

Torchon bobbin lace pattern to make a beautiful 3d Christmas tree. Bobbin lace pattern to make a Christmas tree in Torchon lace. The pattern uses 20 pairs. The pattern is complete with suggestion for threads and instructions. The pattern includes a beaded spider and a half stitch trail. Ideal for all levels of lacemakers.

Torchon bobbin lace to make a bookmark with the February birthstone. The pattern requires 24 pairs of bobbins and uses variegated 35wt or 1 strand of embroidery thread, and a bead.Valdani 30, Finca. The bookmark measure approximately 16.25cm x 5.25cm not including the tassel. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses rose ground.

Torchon bobbin lace pattern to make Florrie's Poppy. The pattern is worked in Finca30 but other thread details are given. The Poppy uses up to 16 pairs and a black button is needed. The approximate finished size is 7cm x 6cm.

This is a lace pattern to make a small gift bag in Torchon bobbin lace. The bag measures approximately 6.25cm x 8.5cm and the pattern comes with full instructions. This bag is ideal for lots of different occasions from Christmas, Easter, weddings, and much more. All you have to do is change the colour of the thread and the colour of the ribbon. Very versatile pattern and easy and quick to make.

Bobbin lace pattern to make a Holly wreath for Christmas. A Torchon bobbin lace pattern to make a beautiful wreath for Christmas. The pattern uses up to 22 pairs and some knowledge of torchon would be helpful. The design has rose ground, honeycomb and beads in it. The wreath can be made in different sizes depending on the size of the ring you have. The pattern comes complete with instructions.

Torchon bobbin lace pattern to make a Good Luck Horseshoe for a bride. The pattern uses up to 14 pairs and can be made in a variety of threads (all listed for your information). The design measures approximately 12cm wide and 13cm in length not including the flowers. The design has beaded rose ground and comes with full instructions. Some knowledge of Torchon bobbin lace is needed.

Torchon bobbin lace pattern using spiders and honey comb stitch. The design is based on the nursery rhyme Incy Wincy Spider. The pattern uses spiders and honey comb stitches. Thread used is Finca 30 and Valdani Variegated 35wt. The design uses 34 pairs. The approximate finished size is 14cm square (5.5" sq). Ideal as a first big project, designed with beginners in mind. Lots of spiders!!

Torchon bobbin lace to make a bookmark with the January birthstone. The bookmark measure 17.5cm x 3.75cm not including the tassel. The pattern requires 22 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and a bead. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses honeycomb.

Torchon bobbin lace to make a bookmark with the July Ruby birthstone. The pattern requires 8 pairs of bobbins and uses variegated 35wt or 1 strand of embroidery thread, and bead.Valdani 30, Finca. The bookmark measure 16.5cm x 4cm not including the tassel. The pattern comes with full instructions and is ideal for all levels of lacemakers. The bookmark is worked down one side and up the other.

Torchon bobbin lace to make a bookmark with the June Pearl birthstone. The bookmark measure 17.5cm x 4cm not including the tassel. The pattern requires 16 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and bead. The pattern comes with full instructions and is ideal for all levels of lacemakers. The bookmark uses spiders.

A Torchon bobbin lace pattern to make Lace Dreams. The pattern takes up to 21 pairs. The design has beads in it. There are 2 sizes of circles, the large circle measures approximately 9.5cm and fits a 10cm ring and the smaller circle measures approximately 8.5cm. Some knowledge of torchon would be helpful. The pattern comes complete with instructions. Any questions I'm just an email away.

Torchon bobbin lace pattern to create a lace decoration which will hang and catch the light, this decoration has 2 layers, the top layer allows you to view the decorative design on the layer below.  The pattern uses 18 pairs and metallic thread, you are given a choice of these on the instructions. The lace uses beaded rose ground, ground stitch, spiders and honeycomb. Ideal for all levels of lacemakers.

Torchon bobbin lace patterns to make a lace twirl. The pattern uses up to 7 pairs and can be made in a variety of threads (all listed for your information). The pattern also requires beads and wire. The designs uses torchon ground stitch and come with full instructions. Ideal for all levels of lacemakers.

Torchon bobbin lace patterns to make three lace icicles. The pattern uses up to 12 pairs and can be made in a variety of threads (all listed for your information). The pattern also requires beads and wire. The designs have beaded rose ground and spiders and come with full instructions. Ideal for all levels of lacemakers and can be made to any length.

Torchon bobbin lace to make a bookmark with the March Bloodstone birthstone. The bookmark measure 16cm x 4.5cm. The pattern requires 11 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and a bead. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses spiders.

Torchon bobbin lace to make a bookmark with the May Emerald birthstone. The bookmark measure 17.5cm x 4.25cm without the tassels. The pattern requires 22 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, a gimp thread and beads. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses honeycomb.

Torchon bobbin lace pattern with prickings for 2 mini bookmarks. The bookmarks measure 8.5cm x 4.5cm and 8.5cm x 3.5cm. The pattern requires up to 20 pairs of bobbins and uses Finca 30 thread, gimp and beads. The pattern comes with full instructions and is ideal for all levels of lace makers. The stitches used are spiders, honeycomb and rose ground. Ideal for using on cards or scrapbooking.

A Torchon bobbin lace pattern to make lace for a mini Christmas Snowflake decorations. The pattern uses 23 pairs and the thread can be Finca 40, Madeira Tanne/Cotona 30, DMC Cordonnet 80 and metallic thread. The design has spiders in it. The approximate finished size is 10cm x 8.75cm. Some knowledge of torchon would be helpful. The pattern comes complete with instructions.

A Torchon bobbin lace pattern to make a mini Christmas Star decorations. The pattern uses 25 pairs and choice of thread: Finca 50, Presencia La Paleta, Bockesn 120/2, DMC Cordonnet 120, DMC Broder Speical 60, Mimosa 60. The approximate finished size is 9.5cm x 9cm if only 5 segments are worked. Working 5 segments creates a small dome shape instead of a flat design. Some knowledge of torchon would be helpful.

Bobbin lace pattern to make a Noel bell pull in Torchon lace for Christmas. The pattern uses up to 36 pairs and Finca 40 or Madeira Tanne/Cotona 30 or DMC Cordonnet 80 and metallic thread. The design has beaded rose ground in it and adding pairs in for the colour change and comes complete with instructions. The finished size is approximately 18cm x 6.5cm. A knowledge of lace making is recommended.

Torchon bobbin lace to make a bookmark with the November birthstone. The bookmark measure 16.5cm x 4.5cm not including the bead and the tassel. The pattern requires 20 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and bead. The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses triangular ground stitch.

Torchon bobbin lace to make a bookmark with the October Opal birthstone. The pattern requires 9 pairs of bobbins and uses variegated 35wt or 1 strand of embroidery thread, a gimp thread and beads.Valdani 30, Finca. The bookmark measure 14cm x 4.5cm. The pattern comes with full instructions and is ideal for lacemakers with some knowledge.

Bobbin lace pattern to make a Poinsettia flower for Christmas. A Torchon bobbin lace pattern to make a Poinsettia flower inside a metal ring. The pattern takes up to 25 pairs. Suitable thread for this pattern includes Finca 30, DMC Broder Special 40, DMC Broder Machine 20. The design has rose ground and beads in it. Some knowledge of torchon would be helpful. The pattern comes complete with instructions.

Torchon bobbin lace pattern to make the Rainbow In A Ring pattern. Bobbin lace patterns to make a rainbow in a metal ring decoration in Torchon lace The pattern uses 5 pairs and DMC Perle 8 thread, metallic thread and beads. The rainbow fits in a 20cm metal ring. The design has half stitch, picots and false plaits. Ideal for all levels of lacemakers.

Torchon bobbin lace to make a bookmark with ribbons. 30 thread, gimp and ribbon.FincaThe bookmark measure 13cm x 4cm. The pattern requires 20 pairs of bobbins and uses The pattern comes with full instructions and is ideal for all levels of lace makers. The bookmark uses honeycomb stitch. Ideal for using on cards or scrapbooking.

Torchon bobbin lace pattern using different rose ground stitches. The design is worked with three different rose ground stitches. Thread used is Finca 30 and a cotton perle 8. The design uses 34 pairs. The approximate finished size is 14.5cm square (6" sq). The design is a bit more challenging but can be easily simplified.

This is a torchon pattern for adding various shaped frames to use with scrapbooking. Some knowledge of torchon would be helpful. The pattern comes with a circle, square, oval and a straight length so you can make various frames. Finished sizes are approximately Oval - 10.5cm x 9cm Circle - 9.5cm Square - 7.5cm Techniques include roseground, honeycomb and adding beads. The pattern comes with instructions.

Torchon bobbin lace to make a bookmark with the September Sapphire birthstone. The bookmark measure 17.5cm x 5.5cm. The pattern requires 18 pairs of bobbins and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread, and bead. The pattern comes with full instructions and is ideal for lace makers with some knowledge.

A Torchon bobbin lace pattern to make a silver bell for Christmas. The pattern takes 37 pairs and uses a choice of the following thread:- Wonderfil Spaghetti, Presencia Finca 20, DMC Cordonnet Special 30, Gold Rush, Wonderfil Dazzle, Metallic thread. Some knowledge of torchon is needed. The bell stands approximately 7cm x 9.m. The pattern comes complete with instructions. Any questions I'm just an email away.

The Snowflake measures approximately 25cm and uses spiders, honeycomb and introduces colour changes. The pattern takes 58 pairs, plus 6 extra for the coloured threads. Thread used is Finca 40 or Madeira Tanne/Cotona 50, DMC Cordonnet 80, DMC Special Dentelles 80 and metallic thread. This pattern is ideal for lacemakers with some experience but comes with full instructions and diagrams.

Torchon bobbin lace pattern to make the Sparkle circle to decorate a Christmas bauble. Bobbin lace patterns to make a sparkly Christmas tree decoration in Torchon lace The pattern uses 17 pairs and Finca 30 thread, metallic thread and beads. The design has beaded rose ground, 5 legged spiders and comes with instructions. Ideal for all levels of lacemakers.

Spot the Difference is a Torchon bobbin lace pattern which has been worked with 8 common mistakes made in lacemaking on one side and includes full instructions and a visual guide to the 8 mistakes and practical advice on how not to make them. The pattern uses DMC Cordonnet 70 or DMC Broder Machine 20 and 28 pairs. Approximate finished size is 18cm long by 4.75cm wide. Ideal for all levels of lacemakers.

Torchon bobbin lace pattern to make a coaster using leaves and honeycomb. This is a torchon pattern for a Spring Coaster. The pattern uses 24 pairs and the thread can be Finca 30, Valdina variegated 35wt or stranded embroidery thread. Some knowledge of torchon and leaves is needed. The finished size is approximately 80mm square. The pattern comes complete with instructions.

This is a torchon pattern for a small round design to put in a round pot. The pattern uses 26 pairs. Some knowledge of torchon would be helpful. The finished size is approximately 8.5cm. The pattern comes complete with instructions.

Torchon bobbin lace pattern to make a coaster with rose ground. This is a torchon pattern for a Summer Coaster. The pattern uses 24 pairs and the thread can be Finca 30, Valdina variegated 35wt or stranded embroidery thread. The pattern is suitable for all lacemaking abilities. The finished size is approximately 80mm square. The pattern comes complete with instructions. Any questions I'm just an email away.

Torchon bobbin lace patterns to make two garters, border or cake frill. The pattern uses up to 30 pairs and can be made in a variety of threads (all listed for your information). The single design is 3.5cm wide and the double design is 6.5cm wide. The designs have beaded rose ground and spiders and come with full instructions. Ideal for all levels of lacemakers and can be made in any size.

Torchon bobbin lace to make a cross with rose ground. The cross measure 14cm x 9.25cm (5.5" x 3.75"). The pattern requires 7 pairs of bobbins, 1 bobbin for the gimp and uses Finca 30, Valdani variegated 35wt or 1 strand of embroidery thread. The pattern is the ideal size for the front of an A5 card or to use as a bookmark. The pattern comes with full instructions and is ideal for all levels of lace makers.

Torchon bobbin lace pattern using different spider stitches. The pattern uses spiders and also different coloured workers. The pattern comes with instructions. Thread used is Finca 40 and DMC Special Dentelles 80. The design uses 36 pairs plus an extra pair for the coloured fans. The approximate finished size is 25.5cm x 16.5cm The design is a bit more challenging and some lacemaking experience will be helpful.

Torchon bobbin lace pattern to make the Twinkle Twinkle star. Bobbin lace pattern to make a star decoration in Torchon The pattern uses 21 pairs and Finca 40 thread, metallic thread and beads. The stars have beaded rose ground and come with instructions. Ideal for all levels of lacemakers.

Torchon bobbin lace pattern to make a coaster with Triangular Ground and Four Pin Mayflower stitches. This is a torchon pattern for a Winter Coaster. The pattern uses 23 pairs and the thread can be Finca 30, Valdina variegated 35wt or stranded embroidery thread. The pattern is suitable for lacemakers of all abilities. The finished size is approximately 80mm square. The pattern comes complete with instructions.